Summit ThermaPhase Oil/Water Separator TP-6, TP-12, TP-18,
TP-24, TP-36, TP-54, TP-72 series industrial heavy duty oil/water seperator. Special Discount - call for pricing....866-517-1551
To Request for Quote or information on any product
click link>>Contact Us today <<click here
Sizing ThermaPhase Units
To size a ThermaPhase unit, you must know the volume of air being compressed, the relative humidity of the air and the inlet temperature. Table 1 is a chart showing the SCF/M of compressed air required to produce one gallon per hour of condensate at various inlet temperatures and relative humidities.
|
Step 1
|
Locate on Table 1 the SCF/M of air factor using the inlet temperature and relative humidity of the application. |
|
Step 2
|
Divide the SCF/M of air required by the application of the SCF/M of air factor obtained from Table 1. This number is the gallons of condensate per hour required to be processed by the ThermaPhase. |
|
Step 3
|
Pick a ThermaPhase unit with capacity to handle the condensate from Table 2. |
Example
500 SCF/M • Air Temp - 70ºF • Relative Humidity -70%
|
Step 1
|
Referring to Table 1 for an air temperature of 70ºF and a relative humidity of 70%, we find an air factor of 174.3 |
|
Step 2
|
Dividing our compressor capacity of 500 SCF/M by the air factor:
500SCF/M / 174.3 SCF/M/Gal/Hr = 2.87 Gal/Hr.
|
| Step 3 |
Referring to Table 2, we find it takes a ThermaPhase TP-12 to handle this application. |
|
TABLE 1
SCF/M Air Per Gallon of Water Per Hour
|
| Relative Humidity |
40ºF |
50ºF |
60ºF |
70ºF |
80ºF |
90ºF |
100ºF |
| 40% |
923.5 |
628.9 |
436.5 |
307.3 |
219.1 |
158.1 |
115.5 |
| 50% |
737.3 |
502.8 |
348.9 |
245.1 |
174.6 |
125.9 |
91.8 |
| 60% |
613.5 |
418.8 |
290.0 |
203.8 |
145.0 |
104.4 |
76.0 |
| 70% |
525.4 |
358.1 |
248.2 |
174.3 |
123.8 |
89.1 |
64.7 |
| 80% |
459.4 |
313.3 |
216.6 |
152.1 |
108.0 |
77.5 |
56.2 |
| 90% |
408.1 |
278.1 |
192.2 |
134.8 |
90.8 |
68.6 |
49.6 |
| 100% |
367.1 |
250.0 |
172.7 |
121.0 |
85.8 |
61.4 |
44.4 |
|
TABLE 2
Evaporation Rate - Gallons per Hour
|
| |
UNIT |
GALS. / HOUR |
|
| TP - 6 |
1.9 |
| TP - 12 |
4.1 |
| TP - 18 |
6.2 |
| TP - 24 |
8.3 |
| TP - 36 |
12.5 |
| TP - 54 |
18.8 |
| TP - 72 |
25.1 |
To Request for Quote or information on any product
click link>>Contact Us today <<click here
ON LINE SPECIAL - STOP OIL LEAKS IN YOUR PLANT >>>SAFETY First
STS #330 Industrial Gear Oil Sealant & Anti Corrosive used on Gear Boxes , Packing and Gasket Supplement Sealant, Thread Sealant, O ring coating, and also can be used on Radiator Hoses and Batteries terminal . Sold case size of qty of 6-1# jars or mini case of qty of 3-1#jars
STS # 300 Industrial Hydraulic Oil Stop Leak is a lubricating sealant designed to eliminate friction, leaks, and fluid loss by sealing from within. They decrease air intrusion, fluid foaming, jerking, irregular movement, noises and chattering. They prevent the entry of contaminants and they control and reduce the effects of cavitation. They increase the life of pressure hoses, pump parts, joints and cylinder shafts and protect against corrosion and fluid oxidation; maintain fluid level and viscosity as well. It will reduce heat generation and slippage, lubricate the entire system and increase fluid strength. Recommended for weeping joints, Sold by the case (Four (4) - 11oz cans per case
