Gearbox oil Stop Leak, # 330 for  4 gallon tank use 16 oz      

Gearbox oil Stop Leak, # 330 for  6 gallon tank use 18 oz

Gearbox oil Stop Leak, # 330 for  8 gallon tank use 19 oz 

Gearbox oil Stop Leak, # 330 for  10 gallon tank use 20 oz    

Gearbox oil Stop Leak, # 330 for  20 gallon tank use 26 oz  

Gearbox oil Stop Leak, # 330 for  40 gallon tank use 34 oz  

Gearbox oil Stop Leak, # 330 for  80 gallon tank use 44 oz   

Gearbox oil Stop Leak, # 330 for  100 gallon tank use 48 oz   

Sold by a mini case  of three (3) 1 lb. jars = 1 case = 3 jars one lb. each or Six (6)  1# jars = 1 case   NOW Available 

As Packing and Gasket Supplement - apply #330 to the pump and valve packing by buttering conventional packing prior to installation. It provides sealing and easy removal and re-use of the gasket following extended service. On Chevron packing , Fill in EACH of the V grooves. When a little pressure is applied, these will be forced into a paste. The paste will extrude and seal each ring of the chevron packing.

As Thread Sealant,  apply # 330 to the pipe using a brush or paddle. For best results, apply to the first thread of the female threads # 330 will plate our evenly over threads as the connection is being made.

For "O" rings, use the #330 by applying a this coat on the "O" ring . It will not pinch, will reduce friction betewwn the O Ring and not dry out so that you get a longer life.

For Radiator Hoses, use the # 330 by applying first on to the radiator fitting, then slide the hose clamp on and clamp down. 

For Batteries, use the # 330 by putting the battery cable on and clamp down, Then coat the terminal to prevent rust and corrosion.

MANY, MANY other uses for this magic industrial strength sealant