Spencer Technical Sales Inc. |
" The DIFFICULT we will do today, the IMPOSSIBLE will be done tomorrow"
|
 |
|
 |
SC Hydraulics, Liquid pumps, Air Boosters,air operated liquid pumps. L-3, L3-15, L3-25, L3-35, L3-45, L3-65, L3-105, L3-105, D5/10-5, D6/10-6, AB-2, AB-4, ABD-2, ABD-5 series SC Hydraulic Engineering is a leading manufacturer and designer of an ever growing line of high pressure, air-driven liquid pumps, as well as air and gas boosters which are being used in a variety of industries and applications. Spencer Technical Sales is a authorized distributor of SC Hydraulic products selling at a discount. Call 661-266-0966, Fax 661-266-0916 or Email your RFQ to salesSTSinc@aol.com SC Hydraulics will cross over to HASKEL products with like same form, fit function. Call us with your Model and product #. | L3 and L3C Series Liquid Pumps | Compact air operated liquid pumps. Wetted sections available in 316L Stainless Steel (L3) and Carbon Steel (L3C). Seven ratios available in each material, capable of pressure exceeding 18,000 psig. Compact pumps are used commonly for jacks, punches, clamping, holding, bolt tensioning, presses, torque wrenches, valve actuation and pressure testing. These pumps are suited for use with de-ionized water, NOS and CO2 applications. Several modifications available including Hand pump attachment and remote pilot options. http://www.schydraulic.com/documents/L3SeriesREV10-15-06.pdf  LC
| 10-4 Series Liquid Pumps | Smallest of the SC "Standard" type pumps with a 4" diameter air cylinder and 1 1/4" stroke. Nine ratios available with the highest ratio capable of hydraulic pressures up to 22,000 psig. Commonly used where fluid flow is not critical. Typical applications include proof and burst testing, clamping, pressing, jacks and any end use requiring very high pressure at low flows. http://www.schydraulic.com/documents/D1500010CTLGREV03-04-04.pdf  10-4
|
10-5 Series Liquid Pumps
D-5 Series Non Lubricated Liquid Pumps |
The original and most common SC "standard" series pump with a 5 1/4" diameter air cylinder and 1 1/4" stroke. 16 ratios available with the highest ratio capable of hydraulic pressures up to 55,000 psig. Commonly used for bolt tensioning, filter presses, clamping, proof and burst testing, metal forming. The 10-5 series with it's many ratios and modification options can be utilized anywhere a source of hydraulic pressure is required. The D-5 series has all the same characteristic including a Non Lubricated feature. http://www.schydraulic.com/documents/D5&10-5SeriesPumpREV10-15-06.pdf  10-5
|
|
10-6 Series Liquid Pumps
D-6 Series Non Lubricated Liquid Pumps |
The largest of the SC "standard" series pumps with a 7" diameter air cylinder and a 2 1/2" stroke. 13 ratios available with the highest ratio capable of hydraulic pressures up to 73,000 psig. Commonly used where very high pressures are required at low flows. Applications include proof and burst testing to extreme high pressures, torque wrench actuation, bolt tensioning, aircraft jacks, filter presses, clamping, holding, metal forming. 10-6 is used extensively by offshore oil companies in many applications due to the pumps inherent ruggedness and reliability. The D-6 has the same characteristics including a Non Lubricated feature. http://www.schydraulic.com/documents/D6&10-6SeriesPumpREV10-15-06.pdf  10-6
|
| L10 Series Double Acting Liquid Pumps |
The largest liquid pump currently manufactured by SC with a 10" diameter air cylinder, this double acting pump is available in 4 ratios, the highest of which is capable of hydraulic pressures up to 20,000 psig. Created primarily for the offshore rental tool market, the L10 series pumps are commonly used for subsea valve actuation, wireline control systems, blow out preventor controls and flushing rigs. L10 pumps can be applied anywhere there is a requirement for very high hydraulic pressures along with higher flows achieved by the 10-6 series. http://www.schydraulic.com/documents/L10REV10-15-2006.pdf  L-10
| AB2 and AB4 Compact Air Boosters | Available in 2:1 and 4:1 ratio, this compact booster fitting a 4" x 7" silhouette is designed for mounting at the application. Once connected to your existing plant air it will boost the pressure to four times the line pressure. Attaining pressures up to 600 psig (AB4) to provide efficient power for clamping, holding and leveling or any low flow, high pressure applications. http://www.schydraulic.com/documents/AirBoosterREV10-15-06.pdf  AB2
|
| ABD-5 Double Acting Air Boosters | The ABD series of double acting air boosters are available in two ratios 2:1 and 5:1 to take existing plant air and boost pressure by the corresponding ratio. The ABD boosters operate on the same principal as our AB boosters, but are capable of much higher flows. The ABD series can boost pressure up to 1,250 psig (ABD-5) and are easily modified for use with common industrial gases http://www.schydraulic.com/documents/AirBoosterREV10-15-06.pdf  ABD-5
|
| S10304 ABL-4 Series Power Unit | The S10304 series power unit packages the ABL-4 compact 4:1 ratio air booster, air filter/regulator and shut off valve a 2.5 gallon receiver and all necessary plumbing together as a turnkey system. All components are mounted to a steel plate with a base for system portability. Just connect a supply line from your existing plant air and run the pressure line from the receiver outlet to the end use and the system is fully operational. This unit provides up to 600 psig air pressure stored in a 2.5 gallon receiver for any end use needing minimal flow and more pressure than your compressor can supply. http://www.schydraulic.com/documents/AirBoosterREV10-15-06.pdf  S10304 ABL-4
| S10300 ABD-2 Series Power Unit | The S10300 series power unit incorporates the ABD-2 double acting 2:1 ratio air booster, 15 gallon ASME 250 psig receiver and all necessary components and plumbing onto a heavy duty skid. This unit when connected to plant air supply will double the pressure and store it in the 15 gallon receiver. Any end use that requires more pressure than your compressor supplies and does not need high air flow will benefit from the 2:1 system. http://www.schydraulic.com/documents/AirBoosterREV10-15-06.pdf  S10300 ABD-2
|
| S10301 ABD-5 Series Power Unit | The S10301 series power unit uses our ABD-5 double acting 5:1 ratio air booster and a 600 psig ASME 5 gallon receiver. The system will increase your existing shop air to 5 times the pressure supplied by your compressor, the boosted air is stored in a 5 gallon receiver for end uses requiring up to 600 psig. All components needed to control air pressures both going into and coming from the unit are supplied along with gauges for precise control. http://www.schydraulic.com/documents/AirBoosterREV10-15-06.pdf  S10301 ABD-5
|
Gas booster SC Hydraulic Engineering's gas boosters are available in four ratios: 5:1, 15:1, 30:1, and 75:1 in single-acting/single-stage, double-acting/single-stage, and single-acting/two-stage. In addition, double air drive models are available for effective boosting ratios of 60:1 and 150:1 in single and two-stage configurations. The gas boosters are used to intensify a variety of gases including argon, helium, nitrogen, and hydrogen. Some common uses with a booster or booster system are to scavenge bottled gases once the pressure has fallen below operational requirements, pressure testing vessels, laser cutting, aircraft ground support equipment and injection molding. Inlet gas supply pressures can be as low as 50 psig and outlet pressures up to 25,000 psi. http://www.schydraulic.com/documents/GasBoosterREV10-15-06.pdf  Gas Booster
Contact us FAX your Request for Quote to : 661-266-0916 Request for Quote Email: salesSTSinc@aol.com Telephone # 661-266-0966 Address: Spencer Technical Sales, Inc. 38713 Tierra Subida #200-632 Palmdale, CA 93551 Accepting: - Visa - Mastercard - Discover Card - American Express 3% added to invoice for Credit Card service fee, this goes to credit card company Member of the Precision Metal Association (PMA), LA/NTMA, WCSMA Hours of Operation:
Monday–Friday, 8:00 a.m.–5:00 p.m. PST |
|
|
|
 |
 |
|
